Table 6-45: G2630 Programming Mode Options (Cont. From Table 6-44) (Cont. On Table 6-46) - Miele G1000 Technical Information

Technical Information
Function
Pos. 7: Sensor
wash program
modification
(from software
version ID no.
984)
Pos. 8: Main
menu
modification
Pos. 9: Saving
extras
Pos. 10:
System lock
activation
Pos. 11: In
operation lock
Pos. 12:
Temperature
setting

Table 6-45: G2630 Programming Mode Options (Cont. from Table 6-44) (Cont. on Table 6-46)

Programming
Use the cursor buttons as
appropriate to select
Adjust sensor wash, then
press the OK button. Use
the cursor buttons to make
the desired setting.
Use the cursor buttons as
appropriate to select
Change main menu., then
press the OK button. Use
the cursor buttons to mark
the program that is to be
exchanged, then press the
OK button. Then use the
cursor buttons to select the
program that is to replace
the removed program.
Use the cursor buttons as
appropriate to select Save
extras, then press the OK
button. Use the cursor
buttons to make the desired
setting.
Use the cursor buttons as
appropriate to select
System lock, then press
the OK button. Use the
cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select In
operation lock, then press
the OK button. Use the
cursor buttons to make the
desired setting.
Use the cursor buttons as
appropriate to select
Temperature, then press
the OK button. Use the
cursor buttons to make the
desired setting.
174
G1000 / G2000 Dishwashers
Display
The display shows the options On and
Off. This function is used to adjust the
Sensor wash program parameters so it
can be used to wash items with
stubborn stains even if the overall level
of soiling is otherwise low.
The display shows the program
available. The order of the first three
can be modified. After fixing and
confirming a new order, Rearranging is
displayed.
This function is activated as standard.
This is indicated in the display by On. If
the function is not desired, select Off.
This function is deactivated as standard.
This is indicated in the display by Off. If
the function is desired, select On.
The display shows the setting options
6)
Permitted and Not possible (On /
Off from software version ID no. 984).
The options °C and °F are available.