Miele G1000 Technical Information page 153

G1000 / G2000 Dishwashers
Flashing
Rhythm of
Function Programming
Delay Start
LED
Pos. 5:
Long Short
Sensor
wash
program
modification
(from
software
version ID
No. 984)
- 5
Pos. 12:
Long Short
Resetting
standard
settings
1 2
Long Short Pos. 20:
Wash
temperature
modification
(from
software
version ID
2 0
No. –984)
Table 6-32: G2420 / G2430 Programming Mode Options (Cont. from Table 6-31)
Table 6-33)
Press the Delay The Rinse LED is off or
start button 5 flashes. The display
times. The Delay shows P and a digit
start LED alternately: P0 =
flashes 5 times Normal program
rapidly sequence (standard
intermittently. setting); P1 = Modified
Press the program sequence.
Start/Stop button This is used to adjust
as appropriate to the Sensor wash
make the program parameters so
desired setting. it can be used to wash
items with stubborn
stains even if the
overall level of soiling is
otherwise low.
Press the Delay The Rinse LED is off or
start button 12 flashes. This
times. The Delay programmable function
start LED can be used to reset all
flashes once parameters that can be
slowly and 2 modified by the
times rapidly customer to the
intermittently. standard settings. This
Press the display shows P and a
Start/Stop button digit alternately: P0 =
to reset all Non-standard settings
standard have been made; P1 =
settings. All settings reset to
standard settings or no
modifications have
been made.
Press the Delay The Rinse LED is off or
start button 20 flashes. The display
times. The Delay shows P and a digit
start LED alternately. Setting
flashes 2 times options: P0 = Standard
slowly setting; P1 = Wash
intermittently. temperature increased.
Press the Due to a program-
Start/Stop button dependent running time
as appropriate to extension, the wash
make the temperature will be
desired setting. increased.
153
Flashing Rhythm of
Display
Long Short Display
-
-
Long Short Display
-
-
Long Short Display
-
-
Technical Information
Rinse LED
- P0
1 P1
- P0
1 P1
- P0
1 P1
(Cont. on