Table 6-38: G1470 / G2470 Programming Mode Options (Continued On Table 6-39) - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
Flashing
Rhythm of Function
Gel LED
Pos. 0:
Long Short
Software
version ID
- -
check
Pos. 1:
Long Short
Reset
- 1
Long Short Pos.2:
Sensor
- 2
softener
activation /
Water
hardness
setting*1
Pos 3:
Long Short
Dispensed
- 3
rinse aid
quantity
setting

Table 6-38: G1470 / G2470 Programming Mode Options (Continued on Table 6-39)

Programming
Do not press the The display shows
Gel button. The Gel the software
LED is off. version ID No., e.g.
-769
Press the Gel This programmable
button once. The function can be
Gel LED flashes used to reset all
once rapidly modifiable
intermittently. Press parameters (both
the program button customer and
as appropriate to service
make the desired programming) to
setting. the standard
settings. The
display shows P
and a digit
alternately: P0 =
Non-standard
settings have been
made; P1 = All
settings reset to
standard settings or
no modifications
have been made.
Press the Gel The display shows
button 2 times. The P and the digit/s of
Gel LED flashes 2 the set value
times rapidly alternately. Setting
intermittently. Press range: P0 = Sensor
the program button Softener active. P1
as appropriate to to P4 = without
make the desired softener; P5 to P70
setting. = Water hardness,
see Table 6-2.
Press the Gel The display shows
button 3 times. The P and a digit
Gel LED flashes 3 alternately: e.g. P3
times rapidly (standard setting)
intermittently. Press indicates a
the program button dispensed quantity
as appropriate to of 3 ml. Setting
make the desired range: 0 ml – 6 ml.
setting.
163
Flashing Rhythm of
Display
Sani-Wash LED
Long Short Display
-
Long Short Display
-
-
Long Short Display
-
-
-
-
-
1
4
Long Short Display
-
-
-
-
-
-
-
Technical Information
- ID No.
- P0
- P1
- P0
1 P1
2 P2
3 P3
4 P4
9 P19
- P40
- P0 (0ml)
1 P1 (1ml)
2 P2 (2ml)
3 P3 (3ml)
4 P4 (4ml)
5 P5 (5ml)
6 P6 (ml)