Table 6-57: G2830 Service Mode Options - Miele G1000 Technical Information

Technical Information
Function
ID no. check
Fault memory
display
Fault memory
deletion
Component
test
Operating
hours check
Operation: LED
test
Operation:
Buzzer test

Table 6-57: G2830 Service Mode Options

*1 Selection-display module
*2 Control-power module
Quit (without saving)
Switch off the unit.
Programming
Select ID Number. To return to
the main menu, press the OK
touchpad.
Select Fault memory. To return
to the main menu, press the OK
touchpad.
Select Fault memory. Select the
option Delete fault memory?
With the cursor touchpad, then
press the OK touchpad.
Select component. Individual
components V01 – V17 can be
selected via the cursor
touchpad. To return to the main
menu, press the C (Clear)
touchpad.
Select Operating hours. To
return to the main menu, press
the OK touchpad.
Select Operation. Select the
option B01: LED test. To return
to the main menu, press the C
(Clear) button or touchpad.
Select Operation. Select the
option B02: Buzzer test. To
return to the main menu, press
the C (Clear) button or
touchpad.
198
G1000 / G2000 Dishwashers
Display
The display shows version ID
no. for the selection-display
module (BAE) *1 and control-
power module (SLT) *2
The display shows saved fault
messages. If several faults
have been registered, they will
be indicated one after the other.
For a fault code summary, see
6.7, Fault code summary.
Alternatively, No fault is
displayed.
In addition to the fault
messages, the option Delete
fault memory? Is displayed.
The display shows the
components and mini programs
that can be activated with wiring
diagram abbreviations. They
can be selected via the cursor
touchpad. After 2 sec. the
appropriate test program starts,
see 6.6.3, Component test.
The display shows the number
of operating hours
All LEDs and the display light
up
The buzzer is activated