Table 6-13: G2170 Programming Mode Options (Cont. From Table 6-12) (Cont. On Table 6-14) - Miele G1000 Technical Information

Technical Information
Flashing
Rhythm of
Function
Intake/Drain
Lt.
Pos. 26:
Long Short
Add second
interim rinse
2 6
Pos. 27:
Long Short
Extended
drying time
2 7
Pos. 36:
Long Short
Machine
height
setting *1
3 6
Pos. 38:
Long Short
Model
variant
setting *1
3 8

Table 6-13: G2170 Programming Mode Options (Cont. from Table 6-12) (Cont. on Table 6-14)

Programming
Press the Program The Intake/Drain
button 26x. LED flashes 2x
To change the long and 6x briefly
setting, press the intermittently.
Program button The SaniWash
and hold it until the LED is off =
Intake/Drain LED program cycle per
flashes. Then press factory setting; The
the Program button SaniWash LED
to enter the desired flashes = second
setting changes. *2 interim rinse is
added.
Press the Program The Intake/Drain
button 27x LED flashes 2x
To change the long and 7x briefly
setting, press the intermittently.
Program button The SaniWash
and hold it until the LED if off = normal
Intake/Drain LED drying (factory
flashes. Then press setting); the
the Program button SaniWash LED
to enter the desired flashes = enhanced
setting changes. *2 drying.
Press the Program The Intake/Drain
button 36x. LED flashes 3x
To change the long and 6x briefly
setting, press the intermittently.
Program button The SaniWash
and hold it until the LED is off = normal
Intake/Drain LED machine height
flashes. Then press (G1xxx). The
the Program button SaniWash LED
to enter the desired flashes = XXL units
setting changes. *2 (G2xxx).
Press the Program The Intake/Drain
button 38x. LED flashes 3x
To change the long and 8x briefly
setting, press the intermittently.
Program button The SaniWash
and hold it until the LED is off = Gx18x
Intake/Drain LED and Gx171; the
flashes. Then press SaniWash LED
the Program button flashes = Gx170
to enter the desired
setting changes. *2
122
G1000 / G2000 Dishwashers
Flashing Rhythm of
Indication
SaniWash LED
Long Short Display
-
-
Long Short Display
-
-
Long Short Display
-
-
Long Short Display
-
-
- P0
1 P1
- P0
1 P1
- P0
1 P1
- P0
1 P1