Table 6-30: G1180 / G2180 Service Mode (Continued From Table 6-29) - Miele G1000 Technical Information

Technical Information
Flashing
rhythm of
Function
Intake/Drain
LED
Long Short
Pos 4:
Operating
hours
- 4
check
Pos. 5:
Control
- 5
Panel LED
test
Pos. 6:
Control
- 6 Panel
Buzzer
Test

Table 6-30: G1180 / G2180 Service Mode (Continued from Table 6-29)

*1 To make the desired setting adjustments. Hold the Program button until the Intake/Drain Lt. is
blinking, then use the Program button to make your setting changes. Once done, hold the Program
button until the Intake/Drain Lt. is solid again.
Save and quit
Switch off the unit.
Programming
Press the Program The Intake/Drain LED
button 3x. flashes 3x.
To check the The flashing rhythm of
operating hours, the SaniWash LED
press the Program indicates the saved
button and hold operating hours. Each
until the long flash of the
Intake/Drain LED SaniWash LED
flashes. Then press represents 1000 hours
the Program and each short flash
button briefly. *1 100 hours.
Press the Program The Intake/Drain LED
button 4x. flashes 4x.
To start the control All LEDs are lit.
panel test: LED,
press the Program
button and hold
until the
Intake/Drain LED
flashes. Then press
the Program
button briefly. *1
Press the Program The Intake/Drain LED
button 5x. flashes 5x.
To start the control Buzzer on.
panel test: Buzzer,
press the Program
button and hold
until the
Intake/Drain LED
flashes. Then press
the Program
button briefly. *1
148
G1000 / G2000 Dishwashers
Flashing rhythm of
Indication
Long Short Display
-
-
-
SaniWash LED
- -
- -
- -