Table 6-11: G2170 Programming Mode Options (Cont. From Table 6-10) (Cont. On Table 6-12) - Miele G1000 Technical Information

Technical Information
Flashing
Rhythm of
Function Programming
Intake/Drain
Lt.
Pos. 12:
Long Short
Reset to
factory
setting
1 2
Long Short Pos. 20:
Set the
wash
temperatu
re
2 -

Table 6-11: G2170 Programming Mode Options (Cont. from Table 6-10) (Cont. on Table 6-12)

Press the Program The Intake/Drain
button 12x LED flashes 1x long
To reset all and 2x briefly
parameters to intermittently. With
factory setting, this programming
press the Program function, all
button and hold it parameters that can
until the be modified by the
Intake/Drain LED customer can be
flashes. Then press reset to the factory
the Program button setting.
to enter the desired If the SaniWash LED
setting changes. *2 is off, the values are
not at the factory
setting. If the
SaniWash LED
flashes, all values
correspond to the
factory setting.
Press the Program The Intake/Drain
button 20x LED flashes 2x long
To change the intermittently.
setting, press the The SaniWash LED
Program button is off = normal wash
and hold it until the temperature; the
Intake/Drain LED SaniWash flashes =
flashes. Then press increased wash
the Program button temperature with a
to enter the desired resulting running time
setting changes. *2 extension.
120
G1000 / G2000 Dishwashers
Flashing Rhythm of
Indication
SaniWash LED
Long Short Display
-
-
Long Short Display
-
-
- P0
1 P1
- P0
1 P1