Miele G1000 Technical Information page 196

G1000 / G2000 Dishwashers
Technical Information
*1 If Permitted is selected, locking during operation is possible. However, locking
can only be carried out after a program has been started, see the appropriate
operating instructions.
*2 If the electronic unit is replaced during service work, it must be programmed as
follows: First set the country variant and model variant, then switch off the unit,
repeat the accessing procedure and set the machine height.
*3 The SER variant includes the following countries: Portugal, France, Netherlands,
Belgium and Great Britain.
*4 From software version ID no. 984 the display Tab type has been superseded by
Detergent type.
Save and quit
Switch off the unit.
196