Table 6-4: G2020 Programming Mode Options (Cont. From Table 6-3) (Cont. On Table 6-5) - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
Control
Dial Function
Position
11 o'clock Pos. 12:
Resetting
standard settings
Pos. 20: Wash
temperature
modification

Table 6-4: G2020 Programming Mode Options (cont. from Table 6-3) (cont. on Table 6-5)

Programming
To move through With this
the levels, turn the programming
control dial to the function, all
11 o'clock position. parameters that
Press the can be modified by
Start/Stop button the customer, can
1x. Turn the Control be reset to the
dial to the 9 o'clock factory setting. If
position. To reset the Rinse LED is
all parameters off, at least one
(modified by setting was
customer) to the modified. If the
factory setting, Rinse LED flashes,
press the Start/Stop the parameters are
button. as in the factory
setting.
To move through Options: Rinse LED
the levels, turn the is off = wash
control dial to the temperature per
11 o'clock position. factory setting;
Press the Rinse LED flashes
Start/Stop button = increased wash
3x. Turn the control temperature. An
dial to the 3 o'clock increase in wash
position. To change temperature with a
the temperature, resulting extension
press the Start/Stop in program running
button. time.
109
Flashing Rhythm of
Display
Rinse LED
Long
-
Long
-
Technical Information
Short Display
- -
Short Display
- -