Drive Removal - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
Figure 5-31: Slide Shutter Assembly
Note
The slide shutter can only be removed or fitted when the drive cog wheel
is turned with the double tooth in the position shown, see Fig. 5-31.
4. Turn the drive cog wheel to bring the double tooth to the desired position as
follows: Insert a small screwdriver in one of the holes on the cam (linked to the
slide shutter control motor). Turn the cam until the slide shutter can be removed.
5. Remove the slide shutter.
Warning!
Before refitting the slide shutter in the pump housing, make sure that the
double tooth on the drive cog wheel points to the arrow on the housing.
5.4.15.3

Drive Removal

1. Circulation pump removal (5.4.14).
93
Technical Information