Table 6-49: G2630 Service Mode Options - Miele G1000 Technical Information

G1000 / G2000 Dishwashers
Function
Software
version ID
check
Fault memory
display
Fault memory
deletion
Component
test
Operating
hours check
LED test
Buzzer test

Table 6-49: G2630 Service Mode Options

*1 Selection-Display module
*2 Control-power module
Save and quit
Switch off the unit.
Programming
Select ID no. with the OK
button.
Use the cursor buttons to select
Fault memory. To return to the
main menu select Back, press
the OK button.
Select Fault memory. Select
the option Delete fault
memory? With the cursor
button, then press the OK
button.
Use the cursor buttons to select
Consumers. Individual
components V01 – V017 can be
selected via the cursor button.
To return to the main menu
scroll to Back then press the
OK button.
Scroll to Operating hours.
Press the OK button. To return
to the main menu press the OK
button again.
Scroll to Operation. Press the
OK button. Select the option
B01: LED Test. To return to the
main menu, press the OK
button
Select Operation. Select the
option B02: Buzzer Test. To
return to the main menu, Select
Back and press the OK button.
179
Technical Information
Display
The display shows version ID
no. for the selection-display
module (BAE) *1 and control-
power module (SLT) *2
The display shows saved fault
messages. If several faults
have been registered, they will
be indicated one after the other.
For a fault code summary, see
6.7, Fault code summary.
Alternatively, No fault is
displayed.
In addition to the fault
messages, the option Delete
fault memory? Is displayed.
The display shows the
components and mini programs
that can be activated with wiring
diagram abbreviations. They
can be selected via the cursor
button. After 2 sec. the
appropriate test program starts,
see 6.5.1.3, Component test.
The display shows the number
of operating hours.
All LED's and the display light
up.
The buzzer is activated.