Table of Contents
Advertisement
7. Fax
3
Enter the fax number using one-touch dial or
navigator directory.
4
{Black}
50
7.3 Broadcast transmission
You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
navigator directory (page 46).
Manual broadcast: Store items using one-touch dial or
navigator directory (page 46). You can also use the dial
keypad to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
L The broadcast function utilizes stations 1–2. The
one-touch dial function will be canceled.
L Make sure that the {Fax} light is ON.
7.3.1 Programming items into the
broadcast memory
1
Press {Menu} repeatedly to display "DIRECTORY
SET".
2
Select the desired broadcast key.
For BROADCAST:
1. {Broadcast}
2. Press {V} or {^} repeatedly to select
"BROADCAST".
For MANUAL BROADCAST:
1. {Manual Broad}
2. Press {V} or {^} repeatedly to select "MANUAL
BROAD".
3
{Set}
4
Program items.
Using stations 1–3:
Press the desired station key.
Using stations 4–6:
Press {Lower}, then press the desired station key.
Using navigator directory:
Press {V} or {^} repeatedly to display the desired
item. i {Set}
Using the dial keypad (only for manual broad):
Enter the fax number. i {Set}
L The number in brackets indicates the number of
registered items.
L To program other items, repeat this step (up to 20
items).
L If you have programmed the wrong item, press
{Stop} to erase the item.
5
{Set}
L To program another broadcast key, repeat steps
2 to 5.
6
{Stop}
Advertisement
Table of Contents
