Table of Contents
Advertisement
9.8 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
Feature
Setting the community
name for SNMP
Setting the location
where you use this unit
Displaying the link local
address
Displaying the IP
address for auto
configuration
Setting the IP address
for IPv6
Setting the default
router for IPv6
Setting the information
for scan to FTP
Setting the information
for scan to e-mail (via e-
mail server)
Registering the scan to
e-mail destinations (via
e-mail server)
Setting the error notify
feature
Setting the information
for the error notify
feature
Registering
destinations for the
error notify feature
Setting the e-mail print
feature
Setting the e-mail
checking interval for the
e-mail print feature
Tab
[SNMP]
[LAN FEATURE]
[IPv6]
[IPv6]
[IPv6]
[IPv6]
[FTP FEATURE]
[SCAN TO E-MAIL]
[SCAN TO E-MAIL]
[ERROR NOTIFY]
[ERROR NOTIFY]
[ERROR NOTIFY]
[E-MAIL PRINT]
[E-MAIL PRINT]
9. Programmable Features
Selection
Enter the SNMP community name. Consult your
service provider or network administrator for details.
Enter the location information of the unit.
The link local address will be displayed.
The IP address for auto configuration will be displayed.
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Enter the FTP server information to send scanned
images from the unit to an FTP server. See page 74 for
details.
Enter the e-mail server and SMTP server information to
send scanned images from the unit via e-mail. See
page 73 for details.
Register e-mail destinations (up to 300 destinations) for
the unit. See page 74 for details.
[ENABLED]: The unit will send an e-mail to registered
destinations when a problem occurs.
[DISABLED] (default): Deactivates this feature.
Enter the e-mail server and SMTP server information to
send error notification e-mails to.
Enter the e-mail address to which error notifications will
be sent and select the types of problems.
[LIFE WARNING]: A warning indicating that the toner
cartridge, drum cartridge or waste toner cartridge
needs to be replaced soon.
[MEDIA PATH ERROR]: An error indicating that there
is a problem with the paper input tray.
[LIFE ERROR]: An error indicating that the toner
cartridge, drum cartridge or waste toner cartridge
needs to be replaced.
[ENABLED]: The unit will automatically print e-mail
messages that it receives.
[DISABLED] (default): Deactivates this feature.
See page 33 for details.
Enter the desired e-mail checking interval.
77
Advertisement
Table of Contents
