Table of Contents
Advertisement
9. Programmable Features
Feature/Code
Registering the scan to e-mail
destinations (via e-mail
server) (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
Setting the information for
scan to FTP (LAN connection
only)
L This feature can be
programmed only through
the web browser interface.
74
Selection
When you send scanned files via e-mail server, you can register e-mail
destinations (up to 300 destinations) for the unit through the web browser
interface in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type "root" as the user name, then enter the password (feature #155 on
page 63). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [SEND USER].
6. Click [Edit] next to the desired scan to e-mail user.
7. Enter name and e-mail address, then select the station key number from the
drop-down list if necessary. i [Submit]
8. Close the web browser.
When you send scanned files to an FTP server, you can register FTP
destinations (up to 6 destinations) to the unit through the web browser interface
in advance.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Device Configuration]
3. Type "root" as the user name, then enter the password (feature #155 on
page 63). i [OK]
4. Select the [SCAN FEATURE] tab.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server destination.
7. Enter name, domain name, folder directory, etc. i [Submit]
8. Close the web browser.
Note:
L If you do not enter the folder directory in step 7, the scanned image will be
saved in the root folder.
Advertisement
Table of Contents
