Table of Contents
Advertisement
11. Help
Display
"COOL DOWN FUSER"
"DIRECTORY FULL"
"DRUM NOT INSTALLED"
"FAX IN MEMORY"
"FRONT OR LEFT COVER
OPEN"
"KEEP COPYING"
"LOW TEMP."
"MEMORY FULL"
"MODEM ERROR"
"NO FAX REPLY"
"OUT OF PAPER INPUT TRAY
#1"
"PAPER JAMMED"
"PC FAIL OR BUSY"
"PLEASE WAIT"
"REDIAL TIME OUT"
86
Cause & Solution
L The unit is cooling down the fuser unit. Wait for a while.
L There is no space to store new items in navigator directory. Erase
unnecessary items (page 46).
L The color drum cartridge or the monochrome drum cartridge is not installed.
Install it (page 11).
L The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
107.
L If feature #442 (page 69) is set to "ALWAYS",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L The front or left cover is open. Close it.
L Copying has stopped due to some existing problem (example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
L The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
L When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
L There is something wrong with the unit's modem. Contact our service
personnel.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
L Recording paper is not installed or the paper input tray has run out of paper.
Install paper (page 16, 32).
L Recording paper is not fed into the unit properly. Reinstall paper (page 16,
32).
Note:
L "#1": Standard input tray
L "#2": Optional input tray
L "#1+#2": Standard input tray and optional input tray
L A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 97).
L The cable or the computer power cord is not connected correctly. Check the
connections (page 20, 28).
L The software is not running on the computer. Restart the software and try
again.
L The unit is warming up. Wait for a while.
L The other party's fax machine is busy or has run out of recording paper. Try
again.
Advertisement
Table of Contents
