Table of Contents
Advertisement
9. Programmable Features
Feature
Setting the header print
option for the e-mail
print feature
Setting the information
for the e-mail print
feature
Displaying the e-mail
print information
Note:
L See the following sections for details on these related features:
– DHCP mode (feature #500 on page 75)
– IP address (feature #501 on page 75)
– Subnet mask (feature #502 on page 75)
– Default gateway (feature #503 on page 75)
– DNS server #1 (feature #504 on page 75)
– DNS server #2 (feature # 505 on page 75)
– Machine name (feature #507 on page 75)
– IP filtering (feature #532 on page 76)
– Auto IP (feature #533 on page 76)
– HTTPD (feature #534 on page 76)
– IPv6 protocol (feature #535 on page 76)
78
Tab
[E-MAIL PRINT]
[E-MAIL PRINT]
[E-MAIL PRINT]
Selection
[ENABLED] (default): The unit will print received e-
mail with the header information.
[DISABLED]: Deactivates this feature.
When you use the e-mail print feature, you need to
program the POP server setting beforehand. See page
33 for details.
The information for the 30 most recently printed e-mails
will be displayed.
Advertisement
Table of Contents
