Broadcast Transmission - Panasonic KX-MB2010FR Operating Instructions Manual

6. Fax (KX-MB2025/KX-MB2030 only)
4
MStartN
46

6.4 Broadcast transmission

You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
phonebook (page 44).
Manual broadcast: Store items using one-touch dial or
phonebook (page 44). You can also use the dial keypad
to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
R The broadcast function utilises station 1–2. The
one-touch dial function will be cancelled.
R Make sure that the MFaxN light is ON.
6.4.1 Programming items into the broadcast
memory
1
Press MMenuN repeatedly to display "PHONEBOOK
SET".
2
Select the desired broadcast key.
For BROADCAST:
1. MBroadcastN
2. Press MCN or MDN repeatedly to select
"BROADCAST".
For MANUAL BROADCAST:
1. MManual BroadN
2. Press MCN or MDN repeatedly to select "MANUAL
BROAD".
3
MSetN
4
Program items.
Using station 1–3:
Press the desired station key.
Using station 4–6:
Press MLowerN, then press the desired station key.
Using phonebook:
Press MCN or MDN repeatedly to display the desired
item. A MSetN
Using the dial keypad (only for manual broad):
Enter the fax number. A MSetN
R The number in brackets indicates the number of
registered items.
R To program other items, repeat this step (up to 20
items).
R If you have programmed the wrong item, press
MStopN to erase the item.
5
MSetN
R To program another broadcast key, repeat steps
2 to 5.
6
MStopN