Selecting The Operation Mode (Scan/Copy/Fax); Setting The Original - Panasonic KX-MC6020HX Operating Instructions Manual

2. Preparation
2.4 Selecting the operation mode
(Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
– {Scan}: Select this mode when using the unit as a
scanner (page 35).
– {Copy}: Select this mode when using the unit as a
copier (page 39).
– {Fax}: Select this mode when using the unit as a fax
machine (page 48).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 64) and the timer before returning to
the default operation mode (feature #464 on page
64).
22
Document Requirements

2.5 Setting the original

2.5.1 Using the scanner glass
1
Open the document cover (1).
2
Place the document FACE DOWN on the scanner
glass (2), aligning the top left of the document with
the corner to which the m mark points.
3
Close the document cover.
Note:
L Confirm that there are no documents in the
automatic document feeder.
L Place the original onto the scanner glass gently. Do
not press down too firmly to avoid malfunction.
L If the original is a thick book, do not close the
document cover.
L Check that any ink, paste or correction fluid has dried
completely.
L Effective scanning area is as follows:
Effective scanning area
L Shaded area will be scanned.
347 mm
4 mm
1
2
4 mm
208 mm
4 mm
4 mm