Table of Contents
Advertisement
9. Programmable Features
9.2 Basic features
Feature/Code
Setting the date and time
{#}{1}{0}{1}
Setting your logo
{#}{1}{0}{2}
Setting your fax number
{#}{1}{0}{3}
Selecting the language
{#}{1}{1}{0}
Setting the location where
you use
{#}{1}{1}{4}
Setting the dialing mode
{#}{1}{2}{0}
Setting recall/flash time
{#}{1}{2}{1}
Changing the LCD display
contrast
{#}{1}{4}{5}
62
Selection
Enter the date and time using the dial keypad. See page 25 for details.
Enter your logo using the dial keypad. See page 25 for details.
Enter your fax number using the dial keypad. See page 26 for details.
The display and reports will be in the selected language.
L The location setting must also match your location. See feature #114 on
page 62.
{1} "ENGLISH" (default): English is used.
{2} "CZECH": Czech is used.
{3} "SLOVAK": Slovak is used.
{4} "HUNGARIAN": Hungarian is used.
1. {Menu} i {#}{1}{1}{0}
2. Press {1} to {4} to select the desired language. i {Set} i {Menu}
This setting must match your location.
L The language setting is also available (feature #110 on page 62).
{1 } "OTHER E.E."(default) : To use in other Eastern Europe.
{2 } "CZECH" : To use in Czech.
{3} "SLOVAKIA": To use in Slovakia.
{4} "HUNGARY": To use in Hungary.
{1} "PULSE"
{2} "TONE" (default)
See page 21 for details.
The recall/flash time depends on your telephone exchange or host PBX.
{0} "900ms"
{1} "700ms"
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "200ms"
{7} "160ms"
{8} "110ms"
{9} "100ms"
{*} "90ms"
{#} "80ms"
Note:
L The default may vary depending on feature #114 setting.
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
{1} "NORMAL" (default)
{2} "DARKER"
Advertisement
Table of Contents
