Table of Contents
Advertisement
■ Fax memory capacity:
10 MB in total
Approx. 630 pages of memory reception
(max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
■ Laser diode properties:
Laser output: Max. 6.5 mW
Wave length: 770 nm – 800 nm
Emission duration: Continuous
■ Print speed:
Color:
A4: Approx. 20 ppm (pages per minute)
Letter: Approx. 21 ppm (pages per minute)
B/W:
A4: Approx. 20 ppm (pages per minute)
Letter: Approx. 21 ppm (pages per minute)
■ Printing resolution:
1,200 × 1,200 dpi
*1 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party's machine.
*2 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party's machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to change
without notice.
L The pictures and illustrations in these instructions
may vary slightly from the actual product.
L The accuracy of the clock is approximately ±60
seconds a month.
Recording paper specifications
Recording paper:
A4: 210 mm × 297 mm
Letter: 216 mm × 279 mm
Legal: 216 mm × 356 mm
Thin paper/Thick paper/Transparency/Label/Card
stock size:
A4: 210 mm × 297 mm
Letter: 216 mm × 279 mm
Envelope size:
#10: 105 mm × 241 mm
DL: 110 mm × 220 mm
Recording paper weight:
2
2
60 g/m
to 165 g/m
Card stock weight:
2
163 g/m
Note for recording paper:
L We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L Do not use the following types of paper:
– Paper with cotton and/or fiber content that is over
20 %, such as letterhead paper or paper used for
resumes
– Extremely smooth or shiny paper, or paper that is
highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs
or staples
– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolor, scorch or
emit dangerous fumes near 200 °C, such as
vellum paper. These materials may transfer onto
the fusing roller and cause damage.
– Moist paper
– Inkjet paper
L Some paper is designed to be printed on only one
side. Try printing on the other side of the paper if you
are not happy with the print quality, or if misfeeding
occurs.
L For proper paper feeding and best print quality, we
recommend using long-grained paper.
L Do not use paper of different types or thicknesses at
the same time. This may cause paper jams.
L Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.
L To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
14. General Information
107
Advertisement
Table of Contents
