Scanner Id; System Info - Hand Held Products Scanteam 2070 System Manual

Scanner ID

The scanner ships with a factory default scanner ID that you may change to any
four-character string. If you press or select option 1, Default ID, the factory
default scanner ID displays. To modify the current Scanner ID, press or select
option 2, enter a 4-character ID, then press ENTER. The scanner emits a
successful menu change beep and displays the new ID. Press an additional key
exits the System Setup.
To restore the factory scanner ID, press or select option 1, then press ENTER.

System Info

The System Info screen provides information about the software contained in the
scanner. An example is illustrated below. If you need technical support for your
IT3875, record the software product revision and part number.
SCANNER ID SETUP
* 1. Default ID
2. Custom ID
3. Back
ProjectRevision:
3.1.2.6.1.16
Part Number:
WA31204988-003
4 - 11