Charge Pack Specifications (Cless/Nimh/S) - Hand Held Products Scanteam 2070 System Manual

Charge Pack Specifications (CLESS/NIMH/S)

The battery is a rechargeable Nickel Metal Hydride (NiMH) pack. The unique
design of the battery allows the charge pack to be directly charged in a two prong
120 volt wall outlet commonly used in North America. For other parts of the world
with different voltages and frequencies, a prong adapter or universal charge strip
is needed. While the charge pack may be charged directly with 240 volts, the
universal charge strips provide the method to physically adapt to the various
power plug and socket configurations.
The charge pack has an LED indicator that displays charging and fully-charged
conditions. To condition a new battery, we recommend fully charging and
discharging the pack approximately two times so it can reach its full-rated
capacity and is conditioned for full capacity and longer life. (See "Charge Pack
Recommendations" on page 1-4.)
Parameter
Number of scans between charges
IT3870/ST5770
IT3875
Expected hours of operations
IT3870/ST5770 (720 scans per hour)
IT3875 (720 scans per hour)
Battery Charging (Input) Voltage
Capacity
Charge time from full discharge to full charge
Capacity after 500 charges/discharge cycles
# of mechanical contact insertions
Recommended Storage
Storage Time
Up to a month
Up to 3 months
Up to a year
Longer than a year
Note: When storing a charge pack for longer than 6 months, recharge at least
once a year (once every 6 months if possible) to prevent self-discharge
from causing a drop in battery performance, or electrolyte leakage.
9 - 6
Storage Temperature
-4° F to +131° F (-20° C to +55° C)
-4° F to +113° F (-20° C to +45° C)
-4° F to +95° F (-20° C to +35° C)
+50° F to +77° F (+10° C to +25° C)
Specification
18,000
13,680
25 hours
19 hours
85 to 264 VAC @ 47 to 63 Hz
1200 mAh
6 hours (maximum)
At least 80% of original capacity
6000