Hand Held Products Scanteam 2070 System Manual page 81

Auxiliary Port Input Communications
Aux Prefix and Suffix Examples
Example 1: Add a Prefix
To add an HT (tab) Prefix to incoming data:
Step 1. Scan the Add Aux Prefix Prefix Selection bar code.
Step 2. Scan 7 and 2 on the Programming Chart (inside back cover).
Step 3. An "HT" is equivalent to "09" (see the Hex ASCII Chart). Scan 0 and 9
on the Programming Chart.
Step 4. Scan Save.
Example 2: Add a Suffix
To add a CR (carriage return) Suffix to incoming data:
Step 1. Scan the Add Aux Suffix Suffix Selection bar code.
Step 2. Scan 7 and 2 on the Programming Chart (inside back cover).
Step 3. A "CR" is equivalent to "0D" (see the Hex ASCII Chart). Scan 0 and D
on the Programming Chart.
Step 4. Scan Save.
Note: If the Aux Port ID is required in conjunction too other prefixes, scan 5 C 8
0.
Note: To program a backslash (\), scan 5 C 5 C.
3 - 19