IT3875XXX-X2-0 Script Setup
An asterisk in the first character position indicates the active script. The scanner
emits a successful menu change beep when a script is selected and exits the
System Setup. Selecting 5. BACK returns to the System Setup. The Script
Menu is illustrated below.
IT3875XXX-X2-1 Script Setup
An asterisk in the first character position indicates the active script. The scanner
emits a successful menu change beep when a script is selected and exits the
System Setup. Selecting 6. BACK returns to the System Setup. The Script
Menu is illustrated below.
Note: If custom script is selected and no custom script has been loaded, the
scanner is operational; however, nothing appears on the display and
keypad input is not allowed.
Run History Factory Script
This script keeps the history of the past ten scans on the display. After you scan
a bar code or enter keypad data and the information is successfully
communicated to the base, the bar code information appears on the top of the
display. Data from the most recent scan appears at the top of the display while
older data moves down one line at a time. The arrow keys may be used to scroll
up and down through the scan history.
4 - 6
SCRIPT SETUP
*
1. Run History
2. Run Part/Qty
3. Run Demo
4. No Script
5. Back
SCRIPT SETUP
*
1. Run History
2. Run Part/Qty
3. Run Demo
4. Run Custom
5. No Script
6. Back