Hand Held Products Scanteam 2070 System Manual page 212

2. The cordless system may not be programmed to output your bar code
properly.
Example: You scan " 12345 " and the host displays " A12345B ".
Reprogram the cordless system with the proper Symbology selections ( see
Chapter 5, Symbology Menu ).
The cordless system won't read your bar code at all?
If the cordless system will not read your bar code:
1. Try scanning the Sample Bar Codes (found near the back of this manual).
If the cordless system reads the Sample Bar Codes, check that your bar
code is readable. ( See "Is the cordless system having trouble reading your
bar codes?" on page 10-3 .)
Verify that your bar code symbology is enabled. ( See Chapter 5 , Symbology
Menu .)
If the cordless system does not read the Sample Bar Codes either, continue
to #2, below.
2. If the cordless system won't read the Sample Bar Codes either:
Verify that the bar code symbologies are enabled. (Chapter 5 , Symbology
Menu .)
Scan the "Default All..." bar code on each symbology menu page in Chapter
5 , Symbology Menu to enable most symbologies.
10 - 4