System Setup; Script Menu - Hand Held Products Scanteam 2070 System Manual

System Setup

The IT3875 System Setup is a text menu for accessing the script control, work
group selection, scanner ID facilities, and IT3875 information. Access the
System Setup by pressing and holding the following keys together for three
seconds: FN, BK, and ENTER keys, in that order.
You may select an option by either pressing the number of the option or by
pressing the arrow keys to highlight the selection and then pressing the ENTER
key. Each menu frame has a title line that does not move when the arrow keys
are pressed.
If you press the BK key or select the Exit or Back option, you will exit the current
menu and return to the previous frame. Exit the System Setup to return to the
previous state and to resume prior operations.
Note: The System Setup always uses the small font size and prompts using the
English language.
The display shows the title and only three menu items at a time. Additional
options may be viewed pressing the UP or DOWN arrow keys. The System
Setup Main menu is illustrated below.

Script Menu

The IT3875 ships with 2 factory scripts and a product demo installed. A different
custom script may be loaded for each work group. The choice of a factory or
custom script is made independently for each scanner. If custom script is
selected, the custom script for the current work group is executed. A typical
custom script created with VersaCode Language requires less than 3.5 KB,
allowing one script for each work group. The script files are stored in the
ST2070-5 Flash file memory with the total memory limit for all of the custom
scripts at 14 KB. For additional information, please refer to the VersaCode
Language Reference User's Guide or the IQ App Designer User's Guide.
SYSTEM SETUP
1. Script
2. Workgroup
3. Scanner ID
4. System Info
5. Exit Setup
4 - 5