Hand Held Products Scanteam 2070 System Manual page 126

Cordless scanning system system manual
Hide thumbs Also See for Scanteam 2070:
Table of Contents

Advertisement

Search Commands
F8 Search ahead for "xx" character from current cursor position, leaving cursor
pointing to "xx" character. Syntax = F8xx (xx stands for the hex value for
an ASCII code, see Decimal to Hex to ASCII Conversion chart, page 5-21.)
F9 Search back for "xx" character from current cursor position, leaving cursor
pointing to "xx" character. Syntax = F9xx (xx stands for the hex value for
an ASCII code, see Decimal to Hex to ASCII Conversion chart, page 5-21.)
E6 Search ahead for the first non "xx" character from the current cursor posi-
tion, leaving cursor pointing to non "xx" character. Syntax = E6xx (xx
stands for the hex value for an ASCII code, see Decimal to Hex to ASCII
Conversion chart, page 5-21.)
E7 Search back for the first non "xx" character from the current cursor position,
leaving cursor pointing to non "xx" character. Syntax = E7xx (xx stands for
the hex value for an ASCII code, see Decimal to Hex to ASCII Conversion
chart, page 5-21.)
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters, starting at the cur-
rent cursor position, as the cursor is advanced by other commands. When
the FC command is encountered, the suppress function is terminated. The
cursor is not moved by the FB command. Syntax = FBnnxxyy . .zz where
nn is a count of the number suppress characters in the list and xxyy .. zz is
the list of characters to be suppressed. (xx stands for the hex value for an
ASCII code, see Decimal to Hex to ASCII Conversion chart, page 5-21.)
FC Disable suppress filter and clear all suppressed characters. Syntax = FC.
EB Toggles the auxiliary port on and off. This command is used when data is
normally transmitted out the main port and needs to be temporarily sent out
the aux port. The first EB in a format string opens the aux port, temporarily
re-directing data transmission out the aux port. Send commands (F1, F2,
F3, F4) are then used to transmit data. A second EB command closes the
aux port and resumes normal data transmission through the main port.
E4 Replaces up to 15 characters in the data string with user specified charac-
ters. Replacement continues until the E5 command is encountered. Syn-
tax = E4nnxx
characters to be replaced plus replacement characters; xx
ters to be replaced and xx
through zz
1
E5 Terminates character replacement. Syntax = E5.
FE Compare character in current cursor position to the character "xx." If char-
acters are equal, increment cursor. If characters are not equal, no format
match. Syntax = FExx (xx stands for the hex value for an ASCII code, see
Decimal to Hex to ASCII Conversion chart, page 5-21.)
EC Check to make sure there is an ASCII number at the current cursor position.
If character is not numeric, format is aborted. Syntax = EC .
ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED .
EF Inserts a delay of up to 49,995 milliseconds (in multiples of 5). Syntax =
EFnn where nn is a count of the number 5 ms delays, up to 9,999.
5 - 24
xx
yy
yy
...zz
1
2
1
2
defines replacement characters, continuing
2
and zz
.
2
zz
where nn is the total count of both
1
2
defines charac-
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageteam 3870Imageteam 3875Scanteam 5770

Table of Contents