Default Auxiliary Port Protocol; Baud Rate Selection - Hand Held Products Scanteam 2070 System Manual

Auxiliary Port Protocol

Default Auxiliary Port Protocol

Baud Rate Selection

This selection sets the baud rate from 300 bits per second to 38,400 bits per
second. Programming baud rate causes the data to be sent at the specified rate.
The device connected to the Auxiliary Port must be set up for the same baud rate
as the Aux Port to ensure reliable communication.
1200
4800
19200
<Default All Auxiliary Port Protocol>
300
600
2400
9600
*38400
3 - 11