Control Panel Options
Network
Access: Start | Settings | Control Panel | Network Icon
Reset Radio Parameters
After changing radio card adapter parameters, and when prompted, the radio card must be
removed from the MX3-CE slot, pause for three seconds and reinsert the radio card in the MX3-
CE. The new radio parameters will then be in effect.
Adapters
Upon selecting a driver, click the Properties button.
The next screen displayed is used to set the IP Address and Name Server Address parameters.
Adjust the settings and click the OK box to save the changes.
Identification
There is no change from general desktop PC Network Configuration / Identification display. Enter
the user name, password and domain information and click the OK box to save the changes.
E-EQ-MX3CERG-G-ARC
Factory Default Settings
Adapter
Radio Card Specific
Identification
User Name
Blank
Password
Blank
Domain
Blank
Figure 4-10 Network Configuration / Adapters Tab
Figure 4-11 Network Configuration / Identification Tab
MX3-CE Reference Guide
77