Print Mode - Avery Dennison Monarch 9825 Quick Reference

P r i n t i n g
Before you print, make sure the printer is connected and ready to receive
data.
Turn on the printer. Your printer is ready to receive and print batches
1.
when you see

PRINT MODE

Ready
2. Download a format and a batch. Refer to the optional Packet
Reference Manual for information on downloading print jobs.
3. The printer prints a strip of labels.
Remove the printed labels. If the printer will be unused for extended
4.
periods of time, we recommend leaving the printhead unlatched.
A d j u s t i n g t h e P r i n t C o n t r a s t
The print contrast controls the darkness of the printing on your supply.
1. From the Main menu, select Setup, then Contrast. You will see the
current setting, for example:
Enter contrast
[-699/699]: +0
Press the left arrow or the right arrow to change the contrast.
2.
Pressing the right arrow darkens the print; the right arrow lightens the
print.
Feed/Cut acts as a toggle switch to change the value by 10 or 1. For
example, to make the contrast 50 (from the default 0), press
Feed/Cut, then press the right arrow five times (50). Press
Enter/Pause to select the displayed value.
Test Label?
No
Press the left arrow or the right arrow to select either "Yes" or "No" to
3.
print a test label and checkt he print contrast. Press Enter/Pause.
Press Escape/Clear until you see the Main menu.
4.
8