Avery Dennison Monarch 9825 Quick Reference page 14

C o m m o n E r r o r s
Error Description/Action
002 Name must be 1 to 8 characters inside quotes.
005 Supply width is invalid.
018 Code page selection defined in the field is invalid.
025 Data length is too long.
101 Format referenced by batch not in memory.
252 The language selection must be 0 (English), 1 (French), 2
(German), 3 (Spanish-ES), 4 (Japanese), 5 (Portuguese), 6
(Italian), 7 (Swedish), 8 (Spanish2-MX), 9 (Danish), 10 (Dutch), 11
(Finnish), or 12 (Norwegian).
259 Contrast adjustment must be within the range –699 to +699.
400 Invalid character following {.
403 Field separator was not found.
409 Printer memory is full. Delete unnecessary formats or graphics
from memory.
410 Parity mismatch.
411 Framing error (baud rate mismatch).
412 Flow control mismatch.
413 Online receive buffer is full. Check for a flow control problem.
Font, bar code, or density in the batch does not fit the format.
611
The data in this line of the batch is either missing or does not
612
match the format.
613 Reference point off supply.
614 Portion of field off supply or there may be an invalid character in
the packet.
The printer sensed a calibration of different-sized black marks.
703
Make sure the correct supply type is loaded.
12