Avery Dennison Monarch 9825 Quick Reference page 5

L o a d i n g L a b e l s o r T a g s
Open the cover.
1.
Unlock the printhead by turning the retaining latch.
2.
3. Lift printhead assembly using the printhead tab until the assembly
locks into place.
4. Place the roll of supply on the supply holder. For labels, the supply
unrolls from the top or the bottom. For tags, make sure the supply
unrolls from the bottom, because tag rolls are wound face in. Do not
pick up the printer by the supply holder.
Adjust the supply holder guides so the sides barely touch the roll.
5.
Make sure the supply roll turns freely. If you are using fan-fold
supplies, place the supply stack behind the printer, label side facing
up.
Push down on the supply lever to unlock the supply guides.
6.
Supply
Holder
Guides
Printhead
Tab
Deflector
Tab
3