Avery Dennison Monarch 9825 Quick Reference page 15

704 Printer has not sensed a supply mark when expected or is out of
supplies. Press Escape/Clear and try to continue printing.
Change supply.
751 Printer did not sense a black mark when expected. Press
Escape/Clear and try to continue printing. Change supply.
752 Printer sensed a mark in the wrong place.
753 Printer sensed a mark that is too long.
754 Check for a ribbon jam or remove any slack in the ribbon by turning
the take-up reel clockwise. Load a new ribbon.
755 Printhead is open. Close the printhead.
756 Load supplies.
Load supplies (supply length mismatch). Press Feed/Cut.
757
Either the supply is not seen, the on-demand sensor is broken, or a
758
label was removed too quickly. Check for a label jam or reload
supplies.
Waiting to dispense label. Press Feed/Cut.
763
765 The printhead has less than 8 bad dots and can shift bar code
fields to avoid bad dots. Press Escape/Clear to continue printing.
768 Printhead has more than 8 bad dots or is not connected. Connect
or replace the printhead.
13