Table 10-2 Solaris Operating Environment And System Controller Software Commands For Collecting - Sun Microsystems Sun Fire 6800 Administration Manual

showenvironment
showplatform
showlogs
For details on how to use each of these commands, refer to the Sun Fire
6800/4810/4800/3800 System Controller Command Reference Manual.
3. Collect service-required LED status and data from the platform shell loghost.
Note – Before you access domain shells and collect domain information, check the
platform logs first for any hardware errors. A hardware platform error could lead to
subsequent domain software errors.
To Collect Domain Status Information
1. If a domain is paused due to a system error, collect error messages from the
designated domain sysloghost.
a. Be sure that the loghost for each domain is set up, as described in
b. Collect error messages from the designated domain syslog loghost.
c. Collect service-required LED status and data from the designated domain
syslog loghost.
2. If a domain is not paused or hung, collect status information from the following
sources:
Solaris Operating Environment and System Controller Software Commands
TABLE 10-2
for Collecting Status Information
Command
/var/adm/messages file
dmesg Solaris operating
environment command
showboards,
showenvironment,
showdomain, and showlogs
system controller commands
Fault LED
Platform logs
Description
Contains error messages relative to the current operating
system initialization.
Looks in a system buffer for recently printed diagnostic
messages and prints them on the standard output.
Refer to the Sun Fire 6800/4810/4800/3800 System Controller
Command Reference Manual for a complete description and
syntax on how to use these commands.
Amber fault LED is lit if there is a fault
Check the platform logs to determine if there are any
hardware errors. A hardware platform error can lead to
subsequent domain software errors.
TABLE 3-1
Chapter 10 Troubleshooting
.
115