1.9 I
→ Intercept Destination
→ Intercept No Answer Time
2.10.8 [4-2-1] Portable Station—Extension Settings
→ Intercept Destination
→ Intercept No Answer Time
2.11.3 [5-3-1] Voice Message—DISA System—Option 1—DISA Intercept—Intercept when all DISA ports
are busy
2.15.3 [9-3] Miscellaneous
→ Intercept—Intercept Routing - DND (Destination sets DND)
→ Intercept—Routing to Operator - No Destination (Destination is not programmed)
→ Intercept—Intercept Routing for Extension Call
PT Programming Manual
[203] Intercept Time
[604] Extension Intercept Destination
[625] Destination for Overflow Time Expiration
Feature Manual References
1.4.8 DND (Do Not Disturb)
1.9.10 Intercept Routing—No Destination
Description
Directs a CO line call to an operator when the call has no assigned destination.
Conditions
•
Intercept Routing—No Destination on/off
Intercept Routing—No Destination can be enabled or disabled for the entire system, through system
programming. If disabled, the caller will hear a reorder tone.
•
If an operator is not assigned:
The default intercept destination will be the extension connected to the lowest numbered port, on the
card installed in the lowest numbered slot.
•
Intercept Routing—No Destination also applies to calls from doorphones.
Programming References
PC Programming Manual
2.8.3 [2-2] Operator & BGM—PBX Operator—Day, Lunch, Break, Night
2.15.3 [9-3] Miscellaneous—Intercept—Routing to Operator - No Destination (Destination is not
programmed)
PT Programming Manual
[006] Operator Assignment
132
Feature Manual