Power Failure Restart - Panasonic KX-TAW848 Feature Manual

• If an extension user sets Walking Extension at the same time that the extension's data is being
programmed through PC programming, the data may not be transferred properly. (→ 1.20.2 Walking
Extension)
Installation Manual References
2.5.6 RMT Card (KX-TAW84896)
3.1 Overview
3.2 Connection
3.3 Installation of the PC Programming Software
Programming References
PC Programming Manual
2.16.1 [10-1] Main
→ RS-232C—External Modem Command—Automatic Initialization
→ RS-232C—External Modem Command—Manual Initialization 1–Manual Initialization 5
→ Remote
→ Password—System Password - PC Programming—User Level
→ Password—System Password - PC Programming—Administrator Level
→ Password—System Password - PC Programming—Installer Level
PT Programming Manual
[801] External Modem Control
[810] Remote Programming
[811] Modem Floating Extension Number
Feature Manual References
1.4.5 DIL (Direct In Line)
1.13.3 Password Security

1.13.6 Power Failure Restart

Description
When the electricity is turned back on, the PBX restarts, loads its stored data automatically, and logs the
event as a System Restart in the error log.
Conditions
• In the event of a power failure, PBX memory is protected by a factory-installed lithium battery. There is
no memory loss except the memories of Automatic Callback Busy (Camp-on) (→ 1.1.4 Automatic
Callback Busy (Camp-on)) and Call Park (→ 1.3.5 Call Park).
1.13 P
Feature Manual 159