Panasonic KX-TAW848 Feature Manual page 17

Advanced hybrid & wireless pbx
Hide thumbs Also See for KX-TAW848:
Table of Contents

Advertisement

modification usually involves removing digits and adding access codes to the beginning of the dialed
number.
In situations where a preprogrammed number (such as an Itemized Billing Code) must be added
automatically after the telephone number that was dialed by the extension user, set the Additional
Number of Digits to a value greater than 0.
4.
Routing Plan
Since the preferred carrier may vary depending on the time of day, you can create an ARS-specific time
table and break each day of the week into different time blocks. A different carrier can then be assigned
to each time block.
Routing Plan Time Table: For each Routing Plan, a different carrier can be assigned for each time of
day and each day of the week. Each day can have up to four programmable time blocks.
Routing Plan Priority: For each Routing Plan, a different carrier can be assigned a different priority
for each time of day. Generally, the carrier assigned to priority 1 will be used, however, if the CO lines
assigned to this carrier are busy, a different available carrier will be used according to priority level.
ARS Leading Number Table
Location
Leading
No.
No.
1
1212
2
01181
3
01144
ARS Routing Plan No. 1
Time Table
Monday
Time Block A
Time Block B
Time Block C
Time Block D
→ 2.14.4 [8-3] Routing Plan Time—Time Setting
*1
→ [330] ARS Routing Plan Time Table
→ 2.14.5 [8-4] Routing Plan Priority
*2
→ [331–346] ARS Routing Plan Table (1–16)
5.
Carrier Table
Each carrier must be programmed in the Carrier Table. Here each carrier is assigned a carrier number,
name, the CO lines it is used with, etc.
→ 2.14.6 [8-5] Carrier—Carrier
Carrier Name: Assign a name for the carrier. Used only as a reference.
Trunk Group: Assign the trunk groups which can be used when making calls via this carrier.
Carrier Access Code: Enter the carrier's access code. Consult carrier for details.
Removed Number of Digits: There may be circumstances where the user-dialed number must be
modified in order for the carrier to connect the call. In this case, enter here the number of digits to be
removed automatically from the beginning of the dialed number.
Additional No.
Routing Plan
of Digits
No.
7
1
0
5
0
12
*1
Priority 1
9:00
Carrier A
12:00
Carrier A
17:00
Carrier C
23:00
Carrier
*2
Priority 2
Carrier M
Carrier M
Carrier M
Carrier J
Carrier M
1.1 A
Feature Manual
17

Advertisement

Table of Contents
loading

Table of Contents