Panasonic KX-TAW848 Feature Manual page 85

[Button Usage]
Button
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Direct Station Selection (DSS) Used to call an extension with a one-touch operation. (→ 1.9.11
One-touch Dialing
Incoming Call Distribution
(ICD) Group
Message
FWD/DND (External/Internal/
Both)*
Group FWD (External/Internal/
Both)
Account Code Entry (Account) Used to enter an account code. (→ 1.1.2 Account Code Entry)
Conference
Terminate
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
Call Park
Call Park (Automatic Park
Zone)
Call Log
Log-in/Log-out*
Hurry-up
Wrap-up*
System Alarm
Used to access a specified CO line for making or receiving calls. (→
1.3.11 CO Line Access)
Used to access an idle CO line in a specified trunk group for making
calls. Incoming calls from CO lines in the assigned trunk group arrive at
this button. (→ 1.3.11 CO Line Access)
Used to access an idle CO line for making calls. Incoming calls from any
CO line arrive at this button. (→ 1.3.11 CO Line Access)
Intercom Call)
Used to call a preprogrammed party or access a feature with a one-
touch operation. (→ 1.12.2 One-touch Dialing)
Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (→ 1.9.1 ICD GROUP FEATURES)
Used to leave a Message Waiting indication or call back the party who
left the Message Waiting indication. (→ 1.11.3 Message Waiting)
Used to set the FWD or DND feature for the extension. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.6.7 FWD/DND
Button, Group FWD Button)
Used to set the FWD feature for a specified ICD group. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.6.7 FWD/DND
Button, Group FWD Button)
Used to establish a multiparty conversation. (→ 1.3.13 Conference)
Used to disconnect the current call and make another call without
hanging up. (→ 1.6.2 Flash/Recall/Terminate)
PBX to access external features. (→ 1.5.1 EFA (External Feature
Access))
Used to park or retrieve a call in a preset PBX parking zone. (→ 1.3.5
Call Park)
Used to park a call in an idle PBX parking zone automatically. (→ 1.3.5
Call Park)
Used to show a log of received calls. (→ 1.3.3 Call Log, Incoming)
Used to switch between Log-in and Log-out status. (→ 1.9.3 ICD Group
Features—Log-in/Log-out)
Used to redirect the longest waiting call in the queue of an ICD group to
the overflow destination. (→ 1.9.5 ICD Group Features—Queuing)
Used to switch between Wrap-up/Not Ready and Ready modes. (→
1.9.3 ICD Group Features—Log-in/Log-out)
Used to display a PBX error. (→ 1.10.4 Local Alarm Information)
Usage
Feature Manual
1.6 F
85