Music On Hold - Panasonic KX-TAW848 Feature Manual

1.11 M
• If the extension that received a notification calls back the extension that sent the notification, and the
call is answered, the notification will be cleared automatically. However, if a voice message has been
left on the VPS, whether the notification is cleared or not depends on the VPS settings.
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—Message Waiting Set / Cancel / Call Back
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Message Waiting Set
2.8.17 [2-9] System Options—Option 3—Dial Tone—Distinctive Dial Tone
2.9.18 [3-8-1] VM(DTMF) Group—System Settings—VM DTMF Command—Listening Message
2.10.4 [4-1-4] Wired Extension—Flexible Button—Type
2.10.10 [4-2-3] Portable Station—Flexible Button—Type
2.10.13 [4-3] DSS Console—Flexible Button—Type
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
2.1 Capacity of System Resources
Operating Manual References
1.3.37 Message Waiting

1.11.4 Music on Hold

Description
Music can be played to any party on hold. The following audio sources are available:
a)
Internal audio source
b)
External audio source
c)
Tone
Music Source Assignment
Only one external music port is available. If BGM is selected, it is possible to select whether external music
port, internal music port 1, or internal music port 2 is assigned to BGM.
Conditions
• Hardware Requirement: User-supplied audio device (CD player, radio, etc.) when an external music
source is assigned.
• Volume Control
It is possible to change the volume of an internal and/or external audio source.
• Each tenant can select a music source to use for Music on Hold. The type of call determines which
tenant's music source is used, as follows:
146 Feature Manual