Caller Id - Panasonic KX-TAW848 Feature Manual

1.3 C
1.3 C
1.3.1

Caller ID

Description
The PBX can receive Caller ID information (a caller's name and telephone number) from calls received on
CO lines. This information can be shown on a proprietary telephone (PT) display when receiving a call and
can be used to direct calls from specific callers to specific destinations automatically. Additionally, Caller ID
information is logged in the Incoming Call Log of the extension which received the call, allowing the caller
to view a record of incoming calls or make a call to a person in the call log later.
The PBX can be programmed to modify a caller's telephone number when it is received and, for example,
add a CO Line Access number or add/delete certain digits of incoming telephone numbers automatically.
This allows an extension user to be able to make a call later to a telephone number logged in his or her call
log without worrying about CO Line Access numbers, area codes, etc.
Notes
• The term "Caller ID" used in this Feature Manual refers to features that can receive caller
information sent from the telephone company and received on CO lines. Your network provider
may use a different name for this type of service.
• To receive Caller ID information, you must subscribe to the telephone company's Caller ID service
and enable Caller ID for the appropriate CO line through system programming.
Caller ID to SLT Port:
Caller ID information can also be shown on a single line telephone (SLT) display. This feature is available
only for SLTs compatible with FSK-type Caller ID.
1.
Caller ID-Related Features
Features
Calling Line Identification
(CLI) Distribution
Incoming Call Log
2.
Automatic Caller ID Number Modification
When a call is received, the PBX can automatically modify the caller's telephone number according to
a preprogrammed set of rules (Caller ID Modification Table). This modified number will be automatically
stored in the extension's Incoming Call Log, allowing the extension user to make a call to this number
later without worrying about CO Line Access numbers, area codes, etc.
Each trunk group can be assigned a modification table. Each table has ten formulas for modifying local/
international numbers, and one formula for modifying long distance numbers. When a call is received,
the PBX compares the received telephone number to the area codes programmed under "Local/
26 Feature Manual
Description
Caller ID information received by the PBX is used to
direct calls from specific callers to specific
destinations. The caller's telephone number and a
destination must be assigned in the System Speed
Dialing Table.
Caller information is automatically recorded in the
call log of the extension which received the call. This
information can be used to view a record of incoming
calls or make calls to any number in the call log.
Details in
• 1.3.10 CLI
(Calling Line
Identification)
Distribution
• 1.3.3 Call Log,
Incoming