AT&T DataPort PCX Modem User Manual page 88

Index
N
No Answer Timeout (S7), B-8
O
Online command (O), B-6
online Command mode, 5-1
Operating Mode (\N), B-20
P
P dial modifier, B-2
Pause Time for "," Dial Modifier
(S8), B-8
power requirements, D-2
problems
answer, 6-4
character format, 6-7
command echo, 6-2
configuration, 6-1, C-1
connect, 6-4
data rate, 6-8
dial, 6-3
disconnect, 6-5
fax, 6-9
fax rate, 6-8
file transfer, 6-6
power, 6-1
rate, 6-8
profile, setting default, B-19
Q
QuickLink II Fax
BBS, 1-2
entering commands with, 5-2
installation, 4-1
IN-4
Issue 2 July 1995
R
Repeat Last Command (A/), B-1
repeat last number dialed, B-3
Reset and Load (Z), B-13
Result Code Format (V), B-11
result codes
description, 5-2
list of, E-1
result codes (Q), B-7
return information, E
RPI (Rockwell Protocol Interface),
B-21
software supporting RPI, D-4
RPI Toggle (+H), B-21
RTS/CTS Action (&R), B-17
RTS/CTS Flow Control, software
setting, C-3
RTS-to-CTS Delay (S26), B-10
S
S-registers, S8 ("," Pause Time),
B-2
save
configuration options, B-18
telephone numbers, B-19
Send Break Control (\K), B-20
Smith Micro Software BBS, 1-2
software, for RPI modem support,
D-4
software configuration guidelines,
C-3
software flow control
(XON/XOFF), C-3
speaker control (M), B-6
speaker volume (L), B-5
S-registers
S0 (Auto-Answer Rind Number),
B-7
S2 (AT Escape Character), B-7
S3 (Carriage Return Character),
B-7
S4 (Line Feed Character), B-8