AT&T DataPort PCX Modem User Manual page 61

Communications and Fax
Software Settings
This appendix lists the recommended settings for several
communications, remote communications, and fax software
packages. Refer to your software's user's guide for the
location of these configuration parameters.
Guidelines for All Software
These overall guidelines apply when using the DataPort PCX
with any software:
G
If your software has an Autobaud selection, make sure it
is Off or Disabled.
G
Your DataPort PCX modem and computer (DTE)
communicate via your computer's serial port at a variety
of DTE data rates (baud rates) ranging from 300 bps to
57,600 bps. Use your software package to select the
highest possible DTE rate that your computer can
support.
G
If you manually change the DTE rate while the DataPort
PCX modem is offline, enter AT and press the Enter key
before receiving a data transfer. This is known as
Autobaud, where the DataPort PCX modem uses the "A"
character to gather information about the baud rate and
character structure, and ensures that the modem is
configured to the new speed.
C
Issue 2 July 1995
C-1