AT&T DataPort PCX Modem User Manual page 63

Communications and Fax Software Settings
Table C-1. Software Configuration Guidelines
Configuration
Option
Autobaud
Baud Rate (DTE Rate) Maximum computer
COM/IRQ
Data Bits/Parity/Stop
Bits
Hardware Flow
Control (RTS/CTS)
Lock Speed
Modem Type / Driver
Software Flow Control
(Xon/Xoff)
Terminal Emulation
Table C-2. Modem Configuration Guidelines
Configuration
Option
DTR Action
Hardware Flow Control
(RTS/CTS Flow Control)
Line Rate (VF Rate)
LSD Control
Result Codes
RPI
Setting (If Available)
Off or Disable
can handle; if in doubt,
use 19,200 bps
As identified by
COMTEST
8-N-1, or as
recommended by the
remote system owner
ON or Enable
ON or Enable
DataPort PCX or
generic (Hayes-
compatible) Class 1
Fax Modem
Off or Disable
VT100
ANSI
Setting
RS-232
RTS (Modem)/
CTS (DTE)
Maximum Possible
RS-232
Enable all
Enable
Likely Uses
BBSs and online
services, including
AT&T Paradyne BBS
Mainframe connections
AT&T Paradyne BBS
AT
Command
&D2 (Default)
&K3 (Default)
F0 (Default)
&C1 (Default)
V1, W0, X4 (Defaults)
+H11
Issue 2 July 1995
C-3