BT PaperJet 35 User Manual page 65

Hide thumbs Also See for PaperJet 35:
Table of Contents

Advertisement

64
Help
DOC IN MEMORY
MEMORY FULL
NOT PROGRAMMED
OUT OF INK
PAPER ERROR. PRESS (STOP)
POLL. RETRY NNN
REMOVE DOCUMENT, PRESS (STOP) Paper jam during copying or sending. Press
RX ERROR
RX IN MEMORY
SYSTEM ERROR NN
TX ERROR
The document received is saved in the memory because an error occurred
during reception – e.g. paper jam, ink out etc) - preventing it from being
printed. Check and correct the problem.
One or more documents in the memory have filled the available capacity.
Check to see if there is fault with printing (e.g. paper out, paper jam etc)
and correct it.
You selected a one-touch or speed dial code that has not been set.
Insert a new cartridge, see page 55.
Paper jam during copying or receiving. Press
ejected automatically, remove it. See Paper Jams, page 65.
Polling reception connection not established. Your BT PaperJet is getting
ready to redial.
ejected automatically, remove it. See Paper Jams, page 65.
Scanning cancelled because
Document not received correctly. Press
light off and acknowledge the message.
Received rest of fax into memory because an error occurred during sending,
preventing it from being printed. The type of fault is displayed on the
bottom line.
A fatal error has occurred. Turn your machine off, wait for a few seconds,
then turn it back on again. If the problem continues, call the BT PaperJet
Helpline on 0870 240 8026.
Document not sent correctly. Press
light and acknowledge the message. Send the fax again.
. If the sheet is not
. If the sheet is not
was pressed.
to switch the error indicator
to switch off the error indicator

Advertisement

Table of Contents
loading

Table of Contents