Putting A Call On Hold In Call Appearance Mode - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Putting a Call on Hold in Call Appearance Mode

To hold calls and manage held calls:
1. When you are on an active call, press HOLD.
The Held Call Appearance icon

After the call has been on hold for a delay period set by your system

administrator (the default setting is three minutes), the Deskset reminds you with
a brief ring every 30 seconds.
When a call is on hold, you can use the Deskset Menu to access other functions.

When a call is on hold, you can also press any soft key to perform that action.

2. To take the call off hold, highlight the call and press SELECT, or press the associated
Call Appearance key.
To do this with the Cordless Handset, see
Call Management
12:30PM Thu Feb 25 2010
Graham Bell
To retriev e held call, press key
next to icon.
Transfer Transfer
Lifting the corded handset, or pressing SPEAKER or HEADSET, takes you off
hook on an idle line; it does not take the highlighted call off hold.
74
appears next to the highlighted call.
232-555-0176 2:51
Quick
Dial
Conf Page More 1/3
"Managing Held Calls" on page
Back to Contents
93.