Transferring To An External Number - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Transferring to an External Number

To transfer an active or held call to an external number:
1. From either an active or held call, press
the Cordless Handset displays the Transfer To screen.
2. To transfer a call to an external number, dial the number directly or access the
external number through the Call Log, Redial list, Directory, or Quick Dial.
3. To dial the selected number as a transfer destination, press SPEAKER or PHONE.
A screen similar to the one shown below appears.
4. Press
Call Management
Graham Bell
Transfer To:
EXT_#s
For external phone numbers in Voicemail and CID lists, Synapse dials
whatever digit, if any, that must be dialed first and then dials the number in
the display. Therefore, numbers that need editing (adding a preceding 1 or
a country code, or removing the area code) cannot be dialed from Voicemail.
 
Press or to edit Call Log entries.
Graham Bell
Transfer To:
John Stanley
1-232-423-2234
Press XFER to
complete
XFER
to complete the transfer.
XFER
You can press
XFER
transfer) or after the extension picks up (supervised transfer).
89
. An active call is put on hold, and
XFER
CANCEL
CANCEL
before the extension picks up (unsupervised
Back to Contents