Call Management Using A Headset - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Call Management Using a Headset

You can use a TL7600 Cordless Headset, as shown in Figure 34 or a corded headset with
the Deskset.
You can register an optional TL7600 Cordless Headset directly to your Synapse
Deskset. There are no wires or cords except for the power cord to the Headset
charger. To learn more about the AT&T TL7600 Cordless Headset, visit our web
site at
Canada, dial
To use a Headset:
From Idle mode or during a call using the corded handset or speakerphone, press

HEADSET.
If you have a headset connected to the jack on the back of the Deskset, then
that headset becomes active.
If you have a AT&T TL7600 Cordless Headset registered to the Deskset, then the
Cordless Headset becomes active.
To send audio from the headset to the Deskset speakerphone, press SPEAKER.

To send audio from the headset to the corded handset, lift the handset. If the

handset is already off hook, press HEADSET to send audio to the handset. While
the handset is off hook, you can press HEADSET again to return audio to the
headset.
Call Management
Figure 34. TL7600 Cordless Headset
www.telephones.att.com/smb
1 (888) 883-2474
97
Back to Contents
1 (888) 916-2007
or call
.
. In