•
I
Gemini
User's
Manual
•
•
Hint #3:
Begin by setting either ribbon spool
•
securely on a ribbon spool axle. Make sure
you have the spool positioned so it will
•
windlunwind as shown in the figures. Place
the spool securely on the axle, so that the
•
"drive pins" engage the spool.
• •
• •
• •
• •
• •
Figure
2-16.
You might want to use a ball point pen to lightly press
•
the ribbon guide toward the platen while inserting the ribbon.
34
Hint #4:
Then thread the ribbon, taking care around
the print head. Figure 2-16 shows how to
insert the ribbon in the slot between the
print head and the ribbon guide. Figure
2-17 shows you how to position the ribbon
to avoid misprints or to prevent the ribbon
coming off during printing.
• •
• •
• •