Advertisement
I
Gemini User's Manual
ATTACHING THE PAPER SEPARATOR AND GUIDE
After you have removed the fixing screws, turn your printer back
over so it's right-side-up.
In Chapter 2, you'll learn how to install the ribbon, set the print
head gap, and load three types of paper. Those three types of
paper are:
*
Individual sheets (such as stationery)
*
Sprocket·fed computer fanfold paper
*
Rolls of paper
For individual sheets of paper, you don't need any of these paper-
feeding attachments. However, for sprocket·fed paper, you need
to attach the paper separator and paper guide, as shown in
Figures G-5 and G-6.
Note: To insert these paper·feeding accessories, insert one side,
then gently bend back the other protruding end until it slips
into place.
Paper separator
/ " Paper guide
Figure
G·5.
The paper guide and paper separator are inserted in the notches
(right and left) indicated for one side in this illustration of the Gemini·tOX
222
I
• •
•
I
• •
• •
• •
I
• •
• •
•
I
• •
• •
I
Advertisement
