Advertisement
I
Gemini User's Manual
----------------------
Paper separator
Release lever
\
Figure
2-11.
The first step is to prepare the Gemini-15X by putting the
mechanical controls in the "open" position.
28
Steps 9-12/ead you down two separate paths: Steps 9A through
12A are for loading sprocket paper from "behind" the printer; steps
98 through 128 instruct you on loading paper from "beneath" the
Gemini-15X.
9A.
Place the stack of fanfolded computer
paper behind the printer.
10A.
Insert the sprocket paper from the back of
the printer (as shown in Figure 2-12).
11 A.
Feed the top sheet between the paper
chute and the platen cover, and around the
platen to the front.
12A.
Push the paper up past the paper press,
and return the paper separator to its
horizontal position.
• •
•
• •
• •
•
• •
• •
• •
•
• •
• •
• •
• •
Advertisement
